The short answer. Procure to pay and order to cash are the same transaction seen from opposite chairs. The buyer runs procure to pay, from purchase request to supplier paid. The seller runs order to cash, from quote to cash applied. Five documents cross between them: the purchase order, the order acknowledgment, the advance ship notice, the invoice and the remittance. Every one of them is created in one company’s system and retyped into the other’s.
One purchase, two companies
A design team at a mid-sized company needs 20 laptops. The request goes through approval and becomes a purchase order for $36,000. Here is that single transaction from each side.
The buyer. The request is approved in the procurement system and the budget is committed in the ERP. The purchase order goes to the supplier. Twenty laptops arrive and someone logs the receipt. The supplier’s invoice lands in a shared inbox, gets matched against the order and the receipt, and is paid on its terms. This is procure to pay.
The seller. The same $36,000 shows up as a sales order. The seller’s system books it, checks stock and ships. An invoice goes out on the agreed terms. If payment is late, the seller’s collections team chases it. When the money lands, someone matches it to the invoice and closes the receivable. This is order to cash.
The two stories are the same events with different owners. The buyer’s purchase order is the seller’s sales order. The buyer’s invoice approval is the seller’s collection. The buyer’s payment run is the seller’s cash application. When the buyer approves the invoice quickly, the seller collects quickly. When one side retypes the other’s document, both sides inherit the error.
This post compares the two sides. For the full detail of each, see the post on the procure-to-pay process and the post on the order-to-cash process. Neither is repeated here.
The stages side by side
| Buyer: procure to pay | The transaction | Seller: order to cash |
|---|---|---|
| Purchase request and approval | Customer decides to buy | Quote and configure |
| Supplier review and setup | Terms agreed | Contract, approval and signature |
| Purchase order and budget commitment | Purchase order sent | Order booking |
| Goods receipt | Goods shipped and delivered | Provisioning and fulfillment |
| Invoice capture | Invoice issued | Billing and invoicing |
| Three-way match and approval | Invoice disputed or accepted | Collections and receivables |
| Payment | Money moves | Cash application and reconciliation |
| Expense and ledger posting | Both sides book it | Revenue recognition and close |
Two things stand out. First, the middle column is thin: the actual exchange between companies is a handful of documents. Second, each side has more stages than the other cares about. The seller’s quote configuration and revenue recognition are invisible to the buyer. The buyer’s supplier review and budget check are invisible to the seller.
The documents that cross between companies
Everything the two sides know about each other comes through five documents.
- Purchase order (PO). The buyer states what it will buy, at what price and quantity. It starts the seller’s order booking.
- Order acknowledgment. The seller confirms the order, or changes it: a different ship date, a substitute item or a partial shipment. The buyer’s order should be updated to match, and often is not.
- Advance ship notice (ASN). The seller says what has shipped and when it will arrive. It lets the buyer’s warehouse expect the delivery and record the receipt.
- Invoice. The seller bills for what shipped. It starts the buyer’s match and the seller’s collections clock.
- Remittance advice. The buyer says which invoices a payment covers. Without it, the seller’s cash application guesses.
Large buyers and sellers often exchange these over EDI, a standard format for business documents. Tray.ai offers EDI through its Orderful partnership, not natively. Smaller companies send the same five documents as PDFs and emails, which means the receiving side types them in by hand. Either way, the documents are the same. The difference is how much human typing sits between them.
Who owns each side
Ownership is split differently on each side, and that split explains where the delays collect.
Procure to pay is shared. Procurement owns the request, the supplier and the purchase order. Accounts payable owns the invoice, the match and the payment. Finance owns the budget and the ledger. Warehouse or receiving staff own the receipt, usually without realizing it is part of a finance process.
Order to cash is shared too, along different lines. Sales owns the quote. Finance or revenue operations owns booking, billing and revenue recognition. Collections owns the chase. Customer success or a provisioning team owns delivery.
In both cases, the process has no single owner from end to end. The handoffs belong to nobody, and that is where the work stalls. The order-to-cash process post calls this out for the sell side. The same is true for the buy side.
The systems on each side
The two sides run on different systems, joined at the ERP and the general ledger.
Buyer systems
- A procurement suite for requests, approvals and purchase orders. Examples: Coupa, Tradogram, Amazon Business.
- The ERP or accounting system, where the budget, the invoice and the payment live. Examples: NetSuite, Sage Intacct, Microsoft Dynamics 365.
- AP automation for reading and matching invoices.
- Contract and supplier review tools, and the mailboxes and chat apps where requests and invoices actually arrive.
Seller systems
- A CRM for the deal, such as Salesforce or HubSpot.
- A CPQ or contract tool for the quote and signature.
- The ERP or accounting system, where the order, the invoice and the revenue live.
- A billing system for subscriptions and usage, and a payment processor such as Stripe.
- A support tool where disputes arrive.
The ERP appears on both lists. A company that buys and sells runs both processes in the same ledger, so the two sides meet there, but not much sooner.
Where each side breaks
Each failure below sits in a handoff, not in a system. For each one, there is a matching failure on the other side.
Buyer side
- The request waits on an approver who is away. The team buys on a card instead, and the purchase skips supplier review.
- A resent invoice gets a new reference. Both copies are paid.
- Nobody logs the receipt. The invoice matches the order, so it is paid, and the goods never arrived. The post on three-way match covers this.
- Budgets count spend late. A cost center looks healthy until the invoices land.
Seller side
- A retry books two orders for one deal. Finance finds the second at month end.
- The invoice goes out late or against the wrong terms. The account manager has to ask finance whether it went out.
- The customer paid and the invoice still shows open. Collections keeps chasing a customer who has already paid.
- Chasing an account mid-renewal. Collections does not know the customer is in a sales conversation.
Notice how the failures connect. A buyer who pays against an unlogged receipt may later dispute the invoice, and the seller’s collections team chases a payment the buyer thinks it should not make. A seller who invoices late delays the buyer’s match. A buyer who cannot send a remittance advice leaves the seller’s cash unapplied. Each company’s slow handoff becomes the other company’s exception.
The categories of procure to pay software
Searching for procure to pay software returns three different kinds of product. They solve different parts of the buy side, and most companies run more than one.
Procurement suites. These cover the request, approval, supplier management and purchase order. They suit organizations with many buyers and a policy to enforce, because they put approvals and catalogs in one place. Honest note: they usually hold the purchase order, but the invoice, the payment and the budget sit in the ERP, so a link to the ERP is part of the project. A request that starts in Slack or email is outside the suite until someone enters it.
AP automation. These capture invoices, read them, route them for coding and approval, and match them to orders. They suit teams where the invoice queue is the bottleneck. Honest note: they start at the invoice. They do not see the request or the budget commitment, so they cannot tell you that spend was approved only when the invoice shows up.
ERP modules. Most ERPs include purchasing, payables and a basic three-way match. They suit companies with simple purchasing and one system of record. Honest note: the ERP is rarely where people ask for things, and its approval flows are usually the least flexible part of the product. Teams often keep the ERP as the ledger and run requests and approvals elsewhere.
No single category covers the whole buy side. Procure to pay automation is the work of connecting them, so that the request, the order, the receipt, the invoice and the payment are one record and not five.
Where Tray.ai fits
Tray.ai does not replace the procurement suite, the AP tool, the ERP, the CRM or the billing system. It connects them. Tray.ai connects to 12,000+ apps, databases, APIs, and services, so the links on either side of the transaction run on one platform with the same error handling, logging and access control.
On the buy side, that means a request approved in Slack is written back to the procurement suite, a purchase order raised in Coupa lands in NetSuite, and an invoice read from a shared inbox is matched before it reaches the ERP. The guides for purchase request approval, AP invoice processing and three-way match show each build.
On the sell side, a deal closed in Salesforce becomes an order in the ERP, a Zuora invoice shows up in NetSuite, and a Stripe payment is written back to Salesforce. The guides for order to cash and collections and dunning cover that side.
Two limits are worth saying plainly. Tray.ai connects the systems on your side of the transaction. It does not connect your supplier’s or customer’s systems for them, and EDI with trading partners goes through the Orderful partnership. And approvals that commit or pay money should still go to a person.
What to do with this
If you run both sides, pick the side where the delay costs you more and start with one handoff:
- Buyer first: count the invoices paid without a logged receipt last quarter. That number tells you whether the receipt is a real step in your process.
- Seller first: count the invoices still open that were already paid. That tells you how far your cash application lags.
- Either way: write down which documents arrive as PDFs or emails. Each one is a retyping step, and each retyping step is a candidate for a connection.
The detail behind each side lives on the owner pages. For the buy side, see procure to pay, with its stages, systems and metrics. For the sell side, see order to cash. Together they describe one transaction from both chairs.